The WELD LATHE family is one of the most versatile ways to rotary weld production parts. Lathes can be supplied with vertical, horizontal, or inclined drive orientations to optimize the effects of gravity on the weld pool. Syncronized spindles with automatic fixtures are available as options.

605 CIRCUMFERENTIAL MIG WELDER

The 605 Circumferential MIG welder is a low cost alternative for circumferential welding.

  • Precision machined bed.
  • Digital Controls
  • DC rotation drive.
  • 500 lb load capacity.
  • Auto cycle operation.
  • Anti-tie down circuit for clamping.
  • Adjustable operator console.
  • Adjustable tailstock along length of bed with 3” of clamping stroke.
  • 400 lbs clamping force at 80 PSIG.
  • Head adjustable along length of back rail.
  • 4″x4″ cross side adjustability.
  • Standard air cooled torch.
  • Two 500 amp welding grounds.
  • BANCROFT wire drive 50-550 IPM or 100-1100 IPM.
  • 1-20 RPM gear options.
  • 110VAC power & shop air on all machines.
  • Digital rotation control.
  • Two torch configurations.
  • Water cooled torches.
  • Optional wire feeders.
  • Hollow spindles.
  • Rotary air or water unions.
  • Six inch stoke tailstock.
  • Adjustable steady rest.
  • Quick adjust back rail.
  • Servo motors.
  • Digital controls.
  • Multiple torch configurations.
  • Special frame configurations.
  • Machine enclosures and flash shields.
  • TIG, Plasma, and Submerged Arc applications.
  • Contour welding applications.
  • Tooling and factory run off.
  • Safety light curtains.
  • Pneumatic steady rest.
Weld Lathe
Weld Lathe

1210 CIRCUMFERENTIAL WELDING SYSTEMS

The 1210 Circumferential welding systems are designed with fast and simple setups in mind.

  • Precision machined bed.
  • Digital Controls.
  • DC rotation drive.
  • 1000 lb capacity.
  • Auto cycle operation.
  • Anti tie down circuit for clamping.
  • Adjustable operator console.
  • 4″x4″ cross slide adjustability.
  • 650 lb clamping force at 80 PSIG.
  • Head adjustable along length of back rail.
  • Adjustable weld head carriage mounted on rollers with four-inch stroke shuttle and hand lock release.
  • Standard air cooled torch.
  • Two 500 amp welding grounds.
  • BANCROFT wire drive 50-550 IPM or 100-1100 IPM
  • .5 to 10 RPM standard rotation speed.
  • 1-20 RPM gear options.
  • 110VAC power & shop air on all machines.
  • Digital rotation control.
  • Two torch configurations.
  • Optional wire feeders.
  • Hollow spindles.
  • Rotary air or water unions.
  • Six inch stroke tailstock.
  • Adjustable steady rests.
  • Quick adjust back rail.
  • Servo Motors.
  • Digital controls.
  • Multiple torch configurations.
  • Special frame configurations.
  • Machine enclosures and flash shields.
  • TIG, Plasma, and Submerged Arc applications.
  • Contour welding applications.
  • Tooling and factory run off.
  • Safety light curtains.
  • Pneumatic steady rest.